Sherline 8620 - Ultimate Cnc Mill Lathe and Accessory Package Review
8-Direction Ultimate CNC Machine Shop
- Description
- Instructions
- Factory Specifications
- Lathe Specifications
- PC Specifications
- Replacement Parts
- Shipping & Returns
Product Description
Sherline'southward Ultimate CNC Car Shop comes complete with CNC-fix lathe and mill plus the stepper motors, computer, software, and cables to run them.
The system includes:
- Palatial 3.5″ ten 17″ lathe with ii stepper motors, in either inch or metric measurements
- 8-Direction Mill with three stepper motors, in either inch or metric measurements
- Handwheels on the rear shaft of the stepper motors besides let transmission control
- Rotary tabular array with stepper motor (for employ as a 4th axis on the mill) and the computer
- A reckoner with Ubuntu Linux-based OS with linuxcnc 4-centrality CNC software preinstalled
- Keyboard and mouse
- 4-axis commuter board and ability supply installed within the computer to run either the factory or lathe, one at a time
- Computer cables to the 10-, Y-, and Z-axes are 69″ in length
- Didactics and utility CD. The CD includes complete instructions, and several free utilities to interpret CAD files or TrueType fonts into Thou-code.
- A blank 4GB USB flash drive is as well included
- 1-year warranty on all components for non-product employ. 90-mean solar day warranty on CNC and computer-related components.
You supply merely a monitor.
Note: Depending upon availability, actual computer supplied with the system may look different than shown to a higher place.
In addition to the lathe, manufacturing plant, and computer you get the following accessories:
LATHE
- iii.1″ 3-jaw Cocky-centering Chuck
- 3/8″ Drill Chuck westward/ Arbors, Cardinal and Drawbolt
- Steady Balance
- Live Center
- Rear Mount Cutoff Tool and Holder
- 3-pc. 1/4″ HSS Tool Set (LH, RH, Boring)
Manufactory
- Headstock Spacer Cake
- 3 pc. Center Drill Set up
- Fly Cutter w/ 1/4″ Carbide Cutting Tool
- Boring Head
- Boring Tool (5/16″ min. hole, i″ max. depth)
- three-pc. Mill Collet Set up w/ Drawbolt
- one/iv″ Drill Chuck w/ #one Morse Arbor, Key and Drawbolt
- 3/viii″ End Mill Holder
- 6-pc. 3/8″ Shank End Mill Set
- Milling Vise
- Step Cake Hold-downwards Gear up
- 4″ CNC Rotary Table with Stepper Motor
- Tilting Bending Table
MISCELLANEOUS
- five/32″ Sherline Hex T-Driver
- Sherline Accessories Store Guide book
- Safety Glasses
Sherline CNC Specification Links
- Sherline CNC Specification page. See all the specs side-by-side on Sherline's consummate line of CNC Mills and CNC Lathes.
- Sherline Stepper Motor Specifications
| | E'er habiliment rubber spectacles when operating car tools. |
Download PDF Assembly and Instruction Guide
Download PDF DRO Instructions
| Max clearance (table to spindle) | 9.00″ (229 mm) |
|---|---|
| Throat (no spacer) | Adjustable |
| Throat (w/ headstock spacer) | Adaptable |
| Travel, "X" Axis | 8.65″ (220 mm) |
| Travel, "Y" Axis | 7.00″ (178 mm) |
| Travel, "Z" Axis | 5.38″ (137 mm) |
| Hole through spindle | .405″ (ten mm) |
| Spindle nose thread | 3/four″-sixteen T.P.I. |
| Spindle nose taper | #1 Morse |
| Spindle runout of Morse taper | .0005″ or less |
| Handwheel graduations | .001″ (.01 mm) |
| Electronically controlled spindle speed range | 70 to 2800 RPM |
| Width Overall* | fifteen.00″ (381 mm) |
| Depth Overall* | Base footprint: 16.25″ (413 mm); With fully extended brass leadscrew encompass: 20.625″ (524 mm) |
| Height Overall (Max.)* | 23.38″ (568 mm) |
| Tabular array size | ii.75″ x 13.00″ (seventy x 330 mm) |
| Agree-down provision | 2 T-Slots |
| Shipping Weight | 45 lb. (20.1 kg) |
| Movements in addition to X-, Y- and Z-axes | Headstock rotation (xc° left/right) |
| Column rotation | (90° left/right) |
| Column pivot | (90° forward/back) |
| Column swing | (xc° left/right) |
| Column travel | (in/out) v.v″ (140 mm) |
| Motor | 90 volt DC with electronic speed control that accepts whatever incoming current from 100VAC to 240 VAC, fifty Hz or 60 Hz. Click here for motor specifications |
| Spindle Speed Range | seventy-2800 RPM continuously variable by electronic speed control |
*Overall dimensions include motor and speed control
| Swing Over Bed | iii.fifty″ (90 mm) |
|---|---|
| Swing Over Railroad vehicle | i.75″ (45 mm) |
| Distance Betwixt Centers | 17.00″ (430 mm) |
| Hole Through Spindle | .405″ (ten mm) |
| Spindle Nose Thread | three/4″-16 T.P.I. |
| Spindle Nose Taper | #1 Morse |
| Spindle Runout of Morse Taper | .0005″ or less |
| Travel of Crosslide | iv.25″ (110 mm) |
| Tailstock Spindle Taper | #0 Morse |
| Protractor Graduations | 0° to 45° by 5° |
| Handwheel Graduations | .001″ (.01 mm) |
| Length Overall | 32.5″ (826 mm) |
| Width Overall | 8.00″ (267 mm) |
| Superlative Overall | 8.00″ (216 mm) |
| Shipping Weight | 31 lb. (xiv.ane kg) |
| Motor | 90 volt DC with electronic speed control that accepts whatever incoming current from 100VAC to 240 VAC, 50 Hz or sixty Hz. Click hither for motor specifications |
| Spindle Speed Range | 70-2800 RPM continuously variable past electronic speed control |
| Max clearance (tabular array to spindle) | ix.00″ (229 mm) |
|---|---|
| Throat (no spacer) | Adjustable |
| Pharynx (westward/ headstock spacer) | Adjustable |
| Travel, "X" Axis | 8.65″ (220 mm) |
| Travel, "Y" Axis | seven.00″ (178 mm) |
| Travel, "Z" Axis | v.38″ (137 mm) |
| Hole through spindle | .405″ (10 mm) |
| Spindle olfactory organ thread | 3/four″-16 T.P.I. |
| Spindle olfactory organ taper | #i Morse |
| Spindle runout of Morse taper | .0005″ or less |
| Handwheel graduations | .001″ (.01 mm) |
| Electronically controlled spindle speed range | seventy to 2800 RPM |
| Width Overall* | xv.00″ (381 mm) |
| Depth Overall* | Base footprint: 16.25″ (413 mm); With fully extended contumely leadscrew cover: 20.625″ (524 mm) |
| Height Overall (Max.)* | 23.38″ (568 mm) |
| Tabular array size | two.75″ x 13.00″ (70 x 330 mm) |
| Hold-down provision | 2 T-Slots |
| Aircraft Weight | 45 lb. (20.one kg) |
| Movements in addition to X-, Y- and Z-axes | Headstock rotation (xc° left/correct) |
| Column rotation | (90° left/correct) |
| Column pivot | (90° forward/dorsum) |
| Column swing | (90° left/correct) |
| Column travel | (in/out) v.5″ (140 mm) |
| Motor | xc volt DC with electronic speed command that accepts any incoming electric current from 100VAC to 240 VAC, fifty Hz or 60 Hz. Click here for motor specifications |
| Spindle Speed Range | seventy-2800 RPM continuously variable by electronic speed control |
*Overall dimensions include motor and speed control
Click on the link for the exploded view of the 8440-Series CNC Lathe to assist identify replacement parts.
Click on the link for the exploded view of the 8020/8021 CNC Palatial Mill to help identify replacement parts.
If yous are yet uncertain please call our customer service representatives for help with this item.
Aircraft
We do non accuse a flat rate for shipping because of the variations in weight for our products. Instead, we accuse you lot what the shipping company charges us. Our website uses a shipping calculator based on the daily rates for USPS and UPS based on the weight and destination of the shipment. You can likewise take u.s.a. utilise your UPS/FedEx account number to charge your shipping. Just enter it in the appropriate box on the checkout page.
Domestic orders are shipped Monday – Fri. Expedited orders must exist placed by ix am PST to ship the same day.
Orders shipping ground have a processing time of vii working days for domestic orders and xiv working days for international orders. CLICK Here for more than information on our shipping and lodge policies.
Returns
Well-nigh merchandise can be returned within 30 days of the buy engagement. A refund will be issued to the original form of payment at the original selling price. View our complete return policy and/or offset your return online hither.
If you are working with contumely or wood, nosotros suggest you employ the toggle switch dust cover to protect the life of your motor & speed control.
Source: https://www.sherline.com/product/8620/
0 Response to "Sherline 8620 - Ultimate Cnc Mill Lathe and Accessory Package Review"
Post a Comment